Setting up the Salt-Master

Salt servers have two types, Master and Minion. The master server is the server that hosts all of the policies and configurations and pushes those to the various minions. The minions, are the infrastructure that you want managed. All of the pushed information is communicated via ZeroMQ; this communication is also encrypted and minions must be authenticated on the master before receiving any commands/configurations.

Installing on Ubuntu

I will be showing you how to install Salt on Ubuntu; however if you want to install Salt on other distributions you can find instructions and a bootstrap script at

Installing Python Software Properties

Saltstack maintains a PPA (Personal Package Archive) that can be added as an apt repository. On my systems before I could add a PPA Repository I had to install the python-software-properties package.

root@saltmaster:~# apt-get --yes -q install python-software-properties

Adding the SaltStack PPA Repository

root@saltmaster:~# add-apt-repository ppa:saltstack/salt
You are about to add the following PPA to your system:
 Salt, the remote execution and configuration management tool.
 More info:
Press [ENTER] to continue or ctrl-c to cancel adding it

Make sure that you press [ENTER] otherwise the repository will not be added.

Update Apt’s Package Indexes

After adding the repository make sure that you update Apt’s package index.

root@saltmaster:~# apt-get --yes -q update

Install The Salt-Master package

root@saltmaster:~# apt-get --yes -q install salt-master

Configuring The Salt Master

Now that Salt has been installed, we will configure the master server. Unlike many other tools the configuration of SaltStack is pretty simple. This article is going to show a very simple “get you up and running” configuration. I will make sure to cover more advanced configurations in later articles.

In order to configure the salt master we will need to edit the /etc/salt/masterconfiguration file.

root@saltmaster:~# vi /etc/salt/master

Changing the bind interface

Salt is not necessarily push only, the salt minions can also send requests to the salt master. In order to ensure that this happens we will need to tell salt which network interface to listen to.


# The address of the interface to bind to

Replace with:

# The address of the interface to bind to
interface: youripaddress


# The address of the interface to bind to

Setting the states file_roots directory

All of salt’s policies or rather salt “states” need to live somewhere. The file_roots directory is the location on disk for these states. For this article we will place everything into /salt/states/base.


#- /srv/salt

Replace with:

    - /salt/states/base

Not all states are the same, sometimes you may want a package to be configured one way in development and another in production. While we won’t be covering it yet in this article you can do this by using salt’s “environments” configuration.

Each salt master must have a base environment, this is used to house the top.sls file which defines which salt states apply to specific minions. The base environment is also used in general for states that would apply to all systems.

For example, I love the screen command and want it installed on every machine I manage. To do this I add the screen state into the base environment.

To add additional environments simply append them to the file_rootsconfiguration.

Adding the development environment:

    - /salt/states/base
    - /salt/states/dev

Setting the pillar_roots

While this article is not going to cover pillars (I will add more articles for salt don’t worry) I highly suggest configuring the pillar_roots directories as well. I have found that pillars are extremely useful for reusing state configuration and reducing the amount of unique state configurations.


#- /srv/pillar


    - /salt/pillars/base

Pillars also understand environments, the method to adding additional environments is the same as it was for file_roots.

Restart the salt-master service

That’s all of the editing that we need to perform for a basic salt installation. For the settings to take effect we will need to restart the salt-master service.

root@saltmaster:~# service salt-master restart
 salt-master stop/waiting
 salt-master start/running, process 1036

Creating the salt states and pillars directories

Before we move on to the salt minion’s installation we should create the file_roots and pillar_roots directories that we specified in /etc/salt/master.

root@saltmaster:~# mkdir -p /salt/states/base /salt/pillars/base

Setting up the Salt-Minion

Now that the salt master is setup and configured we will need to install the salt-minion package on all of the systems we want salt to manage for us. Theoretically once these minions have been connected to the salt master, you could get away with never logging into these systems again.

Installing on Ubuntu

The below process can be repeated on as many minions as needed.

Installing Python Software Properties

root@saltminion:~# apt-get --yes -q install python-software-properties

Adding the SaltStack PPA Repository

root@saltminion:~# add-apt-repository ppa:saltstack/salt
You are about to add the following PPA to your system:
 Salt, the remote execution and configuration management tool.
 More info:
Press [ENTER] to continue or ctrl-c to cancel adding it

Make sure that you press [ENTER] otherwise the repository will not be added.

Update Apt’s Package Indexes

After adding the repository make sure that you update Apt’s package index.

root@saltminion:~# apt-get --yes -q update

Install The Salt-Minion package

root@saltminion:~# apt-get --yes -q install salt-minion

Configuring the Salt-Minion

Configuring the salt minion is even easier than the salt master. In simple implementations like the one we are performing today all we need to do is set the salt master IP address.

root@saltminion:~# vi /etc/salt/minion

Changing the Salt-Master target IP


#master: salt

Replace with:

master: yourmasterip



By default the salt-minion package will try to resolve the “salt” hostname. A simple trick is to set the “salt” hostname to resolve to your salt-master’s IP in the /etc/hosts file and allow the salt-master to push a corrected /etc/salt/minion configuration file. This trick let’s you setup a salt minion server without having to edit the minion configuration file.

Restarting the salt-minion service

In order for the configuration changes to take effect, we must restart the salt-minion service.

root@saltminion:~# service salt-minion restart
salt-minion stop/waiting
salt-minion start/running, process 834

Accepting the Minions key on the Salt-Master

Once the salt-minion service is restarted the minion will start trying to communicate with the master. Before that can happen we must accept the minions key on the master.

On the salt master list the salt-key’s

We can see what keys are pending acceptance by running the salt-key command.

root@saltmaster:~# salt-key -L
**Accepted Keys:**
**Unaccepted Keys:**
**Rejected Keys:**

Accept the saltminion’s key

To accept the saltminion’s key we can do this two ways, via the saltminions specific name or accept all pending keys.

Accept by name:
root@saltmaster:~# salt-key -a saltminion
The following keys are going to be accepted:
Unaccepted Keys:
Proceed? [n/Y] Y
Key for minion saltminion accepted.

Accept all keys:
root@saltmaster:~# salt-key -A
The following keys are going to be accepted:
Unaccepted Keys:
Proceed? [n/Y] Y
Key for minion saltminion accepted.

Installing and Configuring nginx with SaltStack

While the above information gets you started with Salt, it doesn’t explain how to use Salt to install a package. The below steps will outline how to install a package and deploy configuration files using Salt.

Creating the nginx state

SaltStack has policies just like any other configuration automation tools, however in Salt they are referred to as “states”. You can think of these as the desired states of the items being configured.

Creating the nginx state directory and file

Each state in salt needs a sub-directory in the respective environment. Because we are going to use this state to install and configure nginx I will name our state nginx and I am placing it within our base environment.

root@saltmaster:~# mkdir /salt/states/base/nginx

Once the directory is created we will need to create the “init.sls” file.

root@saltmaster:~# vi /salt/states/base/nginx/init.sls

Specifying the nginx state

Now that we have the Salt State file open, we can start adding the desired state configuration. The Salt State files by default utilize the YAML format. By using YAML these files are very easy to read and easier to write.

Managing the nginx package and service

The following configuration will install the nginx package and ensure the nginx service is running. As well as watch the package nginx and nginx.conf file for updates. If these two items are updated the service nginx will be automatically restarted the next time salt is run against the minions.

Add the following to init.sls:

    - installed
    - running
    - watch:
      - pkg: nginx
      - file: /etc/nginx/nginx.conf

The configuration is dead simple, but just for clarity I will comment each line to explain how this works.

nginx: ## This is the name of the package and service
  pkg: ## Tells salt this is a package
    - installed ## Tells salt to install this package
  service: ## Tells salt this is also a service
    - running ## Tells salt to ensure the service is running
    - watch: ## Tells salt to watch the following items
      - pkg: nginx ## If the package nginx gets updated, restart the service
      - file: /etc/nginx/nginx.conf ## If the file nginx.conf gets updated, restart the service

With configuration this simple, a Jr. Sysadmin can install nginx on 100 nodes in less than 5 minutes.

Managing the nginx.conf file

Salt can do more than just install a package and make sure a service is running. Salt can also be used to deploy configuration files. Using our nginx example we will also configure salt to deploy our nginx.conf file for us.

The below configuration when added to the init.sls will tell salt to deploy a nginx.conf file to the minion using the /salt/states/base/nginx/nginx.conffile as a template.

Append the following to the same init.sls:

    - managed
    - source: salt://nginx/nginx.conf
    - user: root
    - group: root
    - mode: 644

Again the configuration is dead simple, but let us break this one down as well.

/etc/nginx/nginx.conf: ## Name of the file
  file: ## Tells salt this is a file
    - managed ## Tells salt to mange this file
    - source: salt://nginx/nginx.conf ## Tells salt where it can find a local copy on the master
    - user: root ## Tells salt to ensure the owner of the file is root
    - group: root ## Tells salt to ensure the group of the file is root
    - mode: 644 ## Tells salt to ensure the permissions of the file is 644

After appending the nginx.conf configuration into the Salt State file you can now save and quit the file.

Make sure before continuing that you place your nginx.conf file into /salt/states/base/nginx/ as if Salt cannot find the file than it will not deploy it. It is also worth noting that if the nginx.conf on the minion differs from the nginx.conf on the salt-master than Salt will overwrite the file automatically on its next run. This means that the nginx.conf on the master is now your master copy.

Creating the top.sls file

The top.sls file is the Salt State configuration file, this file will define what States should be in effect on specific minions. The top.sls file by convention is usually in the base environment.

To add our nginx state to our salt-minion we will perform the following steps.

Create the top.sls file

root@saltmaster:~# vi /salt/states/base/top.sls

Append the following:

    - nginx

The configuration, much like the Salt State files is very simple. Let’s break down the configuration a bit more though.

base: ## Tells salt what environment the following lines are for
  'saltminion*': ## Tells salt to apply the following to any hosts matching a hostname of saltminion*
    - nginx ## Tells salt to apply the nginx state to these hosts

That’s it, we are done configuring salt stack.

Apply The Salt States

Unlike other configuration management tools, by default SaltStack does not automatically deploy the state configurations. Though this can be done, it is not the default.

To apply our nginx configuration run the following command

root@saltmaster:~# salt '*' state.highstate
 State: - file
 Name: /etc/nginx/nginx.conf
 Function: managed
 Result: True
 Comment: File /etc/nginx/nginx.conf is in the correct state
 State: - pkg
 Name: nginx
 Function: installed
 Result: True
 Comment: The following packages were installed/updated: nginx.
 Changes: nginx-full: { new : 1.1.19-1ubuntu0.2
old : 
 httpd: { new : 1
old : 
 nginx-common: { new : 1.1.19-1ubuntu0.2
old : 
 nginx: { new : 1.1.19-1ubuntu0.2
old : 

 State: - service
 Name: nginx
 Function: running
 Result: True
 Comment: Started Service nginx
 Changes: nginx: True

That’s it, nginx is installed & configured. While this might have seemed like a lot of work for installing nginx, if you expand your salt configuration to php, varnish, mysql client/server, nfs and plenty of other packages and services. At the end of the day SaltStack can save SysAdmin’s valuable time.